Español - English

Additional Information

No se encuentra 007613026575013627766:d2getcclydo_buscar_mod

CPE HIGH POWER SOLUTION Ref: Atomic Air

This great solution integrates a router CPE 1000mW 12dBi antennas with 2 each within a waterproof housing and designed for mounting bracket.

This device has a range of about 5 km with line of sight, power one watt makeswireless links can be created between farm buildings and remote locations.

The Atomic Air  IEEE802.11b/g/ny meets the standards for its two antennas canachieve speeds up to 300Mbps in the band of 2.4GHz. His Spanish configuration interface can be accessed from a Web browser and allows for remote administration.

Supports multiple operating modes, such as traditional router as access point,as a wireless client or repeater another wireless network. Its power can be with your 12V adapter or use the POE Power Over Ethernet System

Powered by:

  • Water resistant CPE Solution 
  • 12V Power
  • Supports Power Over Ethernet (P.O.E.) 
  • Compatible with 802.11b / g and 802.11n 
  • Power 1000mW or 1 Watt (adjustable) 
  • It has 2 antennas 12dBi each 
  •  1 Ethernet 10/100 Mbps WAN port 
  •  1 Port 10/100 Mbps Ethernet LAN 
  •  Wireless speed up to 300Mbps 
  • Operating Modes: Router, Access Point, Wireless Client, Wireless Repeater, WDS or Mesh 
  • Wireless Security: WEP, WPA, WPA2, WPA2-PSK, WPA2-AES, RADIUS, WPS 
  • 1 primary wireless network 
  • 4 Virtual Wireless Networks 
  • Quality of Service load balancing, intelligent QoS 
  • Turbo Wi-Fi Multimedia (WMM) 
  • Parental Control web filter by keywords or restriction on the times 
  • Firewall makes sure to support NAT, Port Forwarding or Port Mapping 
  • UPnP 
  • DMZ and SPI 
  • Dynamic DNS 
  • VLAN 
  • VPN Pass-Trough 
  • Firmware upgradeable in Spanish and via HTTP

Latest Firmware Available: To install this firmware on Atomic Air, please press the reset button twice repeatedly and the third keep it down for 20 seconds, then, please enter to default IP 192.168.1.1 or 192.168.1.254 you will find a screen "Emergency WEB "where you should Upload this update. The file to use is called. B_root-gw.bin

Firmware

Tutorial Video:   Setup Installation, Network MESH with 3bumen ATOMIC AIR 

          
   

Leave a comment: